KFI Polaris Ranger XP 1000 Winch Mount

Stuck in a rut? KFI Products have engineered these UTV winch mounts to provide maximum pulling power while withstanding the stresses encountered in winching operations. The mounting systems bolt directly to the UTV's structure - no cutting or fabrication required. Designed to fit with the following Winches:

• OZ ARMOUR: EWX2000A/EWP2500A/EWP2500ASR/EWP3500ASR/ RISE45/RISE45ASR
• MILLER UTILITY: EWP3500A
• KFI: ST17/A2000/A2500-R2/A3000/U45-R2/U45w-R2/SE25/SE35/SE45-R2/SE45w-R2
• KFI: AM-25/AM-35/AS-25/AS-35
• KFI: AS-50/AS-50w
• WARN: VRX 25/VRX 25-S/VRX 35/VRX 35-S/VRX 45/VRX 45-S
• WARN: A2000/A2500/U2500/1.5ci/2.5ci/2.5ce/3.0ci/3.0ce/3.0s
• WARN: RT15/RT25/RT30/XT15/XT25/XT30
• WARN: RT40/XT40
• WARN: Vantage 2000-4000lb
• WARN: ProVantage 2500-4500lbs
• RAMSEY: ATV2500/ATV3000
• SUPERWINCH: Terra25/Terra35/Terra 45/A3500/LT2000/LT2500/LT3000/LT4000ATV/LT4000UTV
• MILE MARKER: PE2.5/PE 3.5/VMX2.5/PE2000/PE3000/PE2500/PE3500
• CYCLE COUNTRY: Work Power 1500 and 2500/Powermax 2500 and 3500
• BADLAND: 2-Hole Winches 
• BADLAND: Standard Winches 
• BADLAND: WIDE Winches 
• CHAMPION: 2-Hole Winches 
• CHAMPION: Standard Winches 
• CHAMPION: WIDE Winches 
• KEEPER CORP. TRAKKER: KT2500/KT3000/KT2500C/KT3000C/KT4000/KT4000C
• KEEPER CORP. TRAKKER: KT2000
• Requires roller fairlead with a 4.875" bolt pattern.
• SMITTYBILT: XRC 2.0
• Requires roller fairlead with a 4.875" bolt pattern.
• Listed models come with incorrect ATV roller fairleads.
• SMITTYBILT: XRC 3.0/XRC 4.0
• XGEAR: X3000/X4000
• 4-Hole Standard (3.00" x 4.875" bolt pattern)
• VENOM: 2000/2500/3000/3500/4000/4500/5000 (Hardcore Series)
• All with 3.00" x 4.875" bolt pattern mount-up
• All with 3.00" x 6.600" bolt pattern mount-up
• TRAVELLER: 1078311
• TRAVELLER: 1078088 / 1087302
• Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF
• Possibly many others with the below standard mounting patterns - 
• 4-Hole (3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern)
• 4-Hole WIDE (3.00" x 6.60" bolt pattern with rollers that are 6.600" or 6.000" bolt pattern)
• 2-Hole (3.10" with rollers that are 4.875" bolt pattern)
• QUADBOSS: RP25/RP35/RP50

• 100% Made in USA.
• Constructed of 3/16" steel.
• Unlike all other mount competitors, our mounts are metal blasted before they are powder coated for the best possible finish.
• Powder coated black for supreme durability.
• Very easy to install.
• Complete installation instructions included.
• All mounting hardware included.
• Satisfaction guaranteed.
• Roller fairlead and winch not included.

Browse more

• Browse all KFI
• Browse all Winch Mounts